F.A.S.T. is the original “Blue Tube Shirt” and the industry leader in cooling and comfort. Our premium shirts have over 50 feet of small capillary water tubing on the front and back, we separate the shirt into 4 equal cooling zones for maximum coverage. Each shirt has two medical grade connectors that connect to our cooling system. F.A.S.T. offers more tubing per shirt than any other manufacturer and is designed to work in conjunction with HANS devices and other mandated safety devices.

All FAST Cooling shirts are machine washable. Use a laundry bag (not included) wash on a delicate cycle with your preferred detergent and hang to dry.

We do not recommend draining the water out of the tubes. We do recommend keeping them clean by running a half cup of bleach (mixed with a full cooler of water) to the cooler, attach the water hoses and shirt and run the entire system for several cycles. This will ensure that all components (tubing, connectors, pump) are clean.

Our COOL AF shirt is designed from a custom wicking fabric made without Spandex or Nylon for maximum comfort. Its athletic cut contains 50 feet of tubing sewn into four cooling zones across the core. No other shirt on the market combines these materials and features. If you are curious about the name, it is COOL And Fast!

Run 2 ounces of Maintenance Additive and enough water to cover the pump in the cooler, attach hoses and shirt, run for several cycles. This cleans the tubing, connectors, and pump. Leave the cooler lid open afterward until everything is completely dry.

There is no need to purchase any special cleaning solution. Regular Clorox ™ laundry bleach is the perfect cleaning solution for your entire system. We recommend keeping the cooler; water hoses and shirt clean by running a half cup of regular laundry bleach (mixed with a full cooler of water) to the cooler, attach the water hoses and shirt and run the entire system for several cycles. This will ensure that all components (tubing, connectors, pump) are clean. After cleaning, leave the lid of the cooler open until completely dry.

We recommend keeping the cooler; water hoses and shirt clean by running a half cup of regular laundry bleach (mixed with a full cooler of water) to the cooler, attach the water hoses and shirt and run the entire system for several cycles. This will ensure that all components (tubing, connectors, pump) are clean. After cleaning, leave the lid of the cooler open until completely dry.

We recommend keeping the cooler; water hoses and shirt clean by running a half cup of bleach (mixed with a full cooler of water) to the cooler, attach the water hoses and shirt and run the entire system for several cycles. This will ensure that all components (tubing, connectors, pump) are clean. After cleaning, leave the lid of the cooler open until completely dry..

2.1 Amps

F.A.S.T. FA1220A is an adjustable timer that allows you to run it ‘full on’ or dial it back for days when you need to ration your ice time. If you have a long race and want to extend the life of your ice, run the timer at the far right of the dial (that slows it to run every couple of minutes). When you want to have the cooler run constantly, keep the dial toward the left (just after you hear it click on).

13 Quart – 15” x 10” x 11”

19 Quart – 16.6” x 11” x 13”

Our coolers are best used with a mounting pan (foam and strap), but we have seen them worked strapped into passenger seats for ease of use.

Duration of ice is based on many factors… Inside temperature. ambient temperature, even the size of the driver. Best way to keep your cooler going for hours is to build blocks of ice (use sandwich containers, stack and freeze, open and stack in cooler), fill in spaces with cubes or pieces and add just enough water to cover the pump.

We have an adaptor for that… Send an email to:Jill@fastcooling.com

We’ve worked with all major auto helmet brands and continually adapt to new styles. Contact us with your helmet details for specific recommendations.

Due to the restrictions in place for SNELL testing, we are only able to make modifications to the “chin bar” piece of the helmet. We specialize in left side air on most helmets. Please contact us if you have an Arai helmet, we have a noninvasive top air piece that is legal with all sanctioning bodies.

Yes, a properly channeled air helmet (with FAST blower attached) should reduce or eliminate shield fogging.

Depending on the season, we need the helmet anywhere from 1-4 days. Please call us to confirm that you are shipping it to us and we can let you know how long the line is.

The most important things to consider are size, weight, power and mounting location. Good rule of thumb is… Dirt racing needs the “bell” housing or “cone” filter, where asphalt racing allows for the “remote intake” with a naca duct.

• Inline blower –2.6 amps
• 105 CFM – 4.3 amps
• 150 CFM – 6.8 amps

Our blowers, air systems and cool suit systems are made for 12V batteries.

We recommend taking the filter out after an event and using an air compressor to blow off all the residual dirt. Our filters are paper (non oiled) and will break down when replacement is needed. Remember to always get a new filter for the beginning of the season, regardless of how your old one looks.

Our filters are located below the bell housing or under the top hood on the remote intake. They can be unscrewed and removed to clean off (do not get wet).

Got more Questions?

We’d be happy to answer all your questions, simply give us a call! 

Call Us

Get in touch

NameEmailMessageSUBMIT